
Energy monitoring for manufacturing.
Manufacturers run the most energy-intensive assets in industry. We meter every line, machine and utility so you can cut waste, protect margins and hit efficiency targets.
Energy is often the third-largest controllable cost on a manufacturing site, yet most plants still manage it from a single monthly meter. Our IIoT programme instruments production lines, compressed-air systems, motors and HVAC at circuit level, giving your engineers live consumption data they can act on shift by shift — not weeks after the invoice arrives.
Key benefits
- Cut plant energy spend by targeting the worst-performing lines first
- Eliminate compressed-air and idle-load waste with hard evidence
- Reduce peak-demand and capacity penalties through load insight
- Build audit-ready data for ISO 50001, ESOS and SECR
Where energy hides in this sector.
Invisible machine-level waste
Idle running, oversized motors and out-of-hours loads hide behind a single site meter and never get investigated.
Compressed-air leaks
Leaks and pressure drift silently consume up to a third of compressor energy across a typical plant.
Peak-demand penalties
Uncoordinated equipment start-ups drive costly maximum-demand and capacity charges.
Ageing, mixed equipment
Fleets of machines from different eras degrade unpredictably, wasting energy long before failure.
How we instrument your operation.
Asset-level sub-metering
Non-invasive current sensors clamp onto individual machine circuits without stopping production.
Compressed-air monitoring
Flow and pressure sensors quantify leak losses and prove the payback of fixing them.
Load scheduling insight
Live demand curves reveal how to stagger start-ups and flatten peaks.
Condition-based alerts
Rising current or vibration flags failing equipment before it fails or wastes energy.
What we typically meter here.
Real loads we instrument in this sector to turn consumption into verified, board-level savings.

CNC and machining cells
Track energy per machine and per part to expose inefficient tooling and out-of-hours idling.
Compressed-air ring mains
Meter generation against demand to size compressors correctly and catch leaks fast.
Process heating and ovens
Monitor kWh per batch to optimise cycles and recover waste heat.
Audit-ready by design.
Continuous, asset-level data underpins ISO 50001 energy management certification and provides the audited evidence required for ESOS Phase compliance and SECR reporting. Verified savings against a measured baseline satisfy both auditors and finance.
Explore ISO 50001 complianceSolutions that power this sector.
Common questions
Still unsure? Our engineers are happy to talk through your estate and requirements.
All FAQsWill installing sensors stop our production lines?
No. We use non-invasive, wireless current sensors that are typically fitted live during normal operation, with no downtime.
How soon will we see savings?
Most manufacturing sites surface actionable waste — usually idle loads or air leaks — within the first two to four weeks of live monitoring.
Can you monitor several plants together?
Yes. The platform benchmarks energy intensity across every line and every site from one central workspace.
Ready to make your estate measure itself?
Request an infrastructure audit and we will design a LoRaWAN energy-monitoring programme built for ISO 50001 readiness across the UK and Europe.
Choose how you would like to engage our team.
Every route below reaches our UK and EU enterprise engineers directly. Pick the one that fits where you are — no obligation, response within one working day.
Common questions
An engineer reviews your metering estate and site plans, then returns a scoped monitoring proposal — typically within one working day of the initial call. There is no cost or obligation.
Send an enquiry
Tell us about your estate and we will route you to the right engineer.




